An Interruptible Progress Bar with OpenMP Support for C++ in R Packages
- CRAN checks, method
Method
Checks and health
CRAN runs every current package through
R CMD checkon a set of machines and publishes a result for each one. The health shown on a package page comes from these results alone.- Problems
- Notes alone never count against a package, but a warning, an error or a failure on any platform is a problem. Open CRAN deadlines are a fact of their own, shown as a clock after the mark, so the mark always says what the checks found.
- Checks only
- Health reflects CRAN's check results and nothing else. Even a package with no tests, no coverage or no recent release can have every platform OK.
- Once a day
- Results are collected once a day from files CRAN publishes. Each platform is one machine set-up, named by its R version, operating system, architecture and compiler, such as r-devel-linux-x86_64-fedora-clang.
- Platforms counted
- The 13 in 3 of 13 is the number of platform rows CRAN published for that package on the day of collection. The set of machines changes over time, so the number is not fixed, and a package missing from a platform counts as neither passing nor failing there.
- OKnotes on 2 of 13
- CRAN 30-day downloads, method
- 76,626+1.6% up on the 30 days before, the better direction
- Dependent packages, method
Method
Reverse dependencies
Dependent packages are other packages that list this one under
Depends,ImportsorLinkingToin theirDESCRIPTIONfile. Those fields list the packages a package needs to install, so dependents break if this one is archived or broken.- As declared
- The counts follow the declarations as written, not whether a package uses the other one when it runs.
- Suggests apart
- Packages that list this one only under
Suggestsinstall and run without it, and use it for tests, examples or an optional feature. They are counted as Suggested by, never among the dependents, and a package that also lists it under one of the three fields is a dependent and is not counted again. - Zero
- Zero dependents means no current CRAN package declares a need for this one, though some may suggest it. On 28 Oct 2026, 19,572 of the 25,581 current CRAN packages had no dependent package.
- 110271 more indirectly
- Test coverage, method
Method
Test coverage
Test coverage is measured by downloading each CRAN package's current source file, installing its dependencies, building it and running its tests under covr.
- Almost half of CRAN has no tests to run
- Only CRAN packages are measured. Many have no percentage, most often because the package has no tests, and that blank is a recorded outcome, not missing data.
- NOT_CRAN
- Tests run with NOT_CRAN=true, so tests that skip themselves on CRAN run here, and the figure can differ from what CRAN's own checks see.
- Current version only
- Only the current version is measured, and a new version on CRAN is measured again. Older rows are kept but never filled in later. This is one package's run.
- Never 0%
- On a package page three states stay apart: measured, no tests, and not measured. Neither of the last two is ever shown as 0%.
- Not measuredthe run failed
- Advisories, method
Method
Security advisories
Advisories come from the R Consortium advisory database, a community record of security problems in R packages, as OSV publishes it.
- The copy
- The record is read once a day. The data is published under the Apache License 2.0 and is credited on the advisories list.
- Box under the name
- Under the package's name, a box names any advisory that affects the current release, with its fix or that there is none.
- Ranges
- Advisories state ranges, such as from 0.9.12 up to but not including 1.8.8. Each range is checked against every version CRAN has published, using the version rules R itself uses, so a release that came out after the advisory was written is still caught by its range.
- Not the package
- The rating is for the library flaw itself, not for how exposed the R package is, and it is never added up into a figure for the package.
- None known
About
Method, About Method Licence figures come from the Licences
License field of each package's DESCRIPTION file, read the way R itself reads it. No licence file is opened.tools::analyze_license() and R's own licence database, as CRAN's checks read it.| is read, so one string can offer two families.
Allows to display a progress bar in the R console for long running computations taking place in c++ code, and support for interrupting those computations even in multithreaded code, typically using OpenMP.
- Maintainer
- Karl Forner
- Licence
- GPL (>= 3)
- Latest release
- 6 Feb 2020
- First release
- 10 May 2013
More details
- Releases
- 7
- Needs compilation
- No
- Date
- 2020-02-06
- RoxygenNote
- 6.1.1
Subjects (1) Method, SubjectsMethod
Subjects and collections
Subjects are the site's own grouping of CRAN packages, found by clustering. Collections are sets of packages that communities declare, such as the tidyverse.
- Subjects
- Subjects are found by clustering the words of current CRAN packages and the packages they use. No one edits them by hand.
- Collections
- Collections are sets that communities declare, through a package that installs the set or an organization on GitHub. The site finds them by rules.
- Who made each
- Subjects are marked Site and collections Community. Subjects, collections and task views are never mixed in one list.
- The day of the data
- Subjects and collections were last worked out on 22 Oct 2026.
Cite
Package
Run in R for the authors' preferred citation:
citation("RcppProgress")R Observatory
For a number measured here: a download total, a coverage figure, an archival date.
Balamuta, J. J. (2026). R Observatory: Metrics for RcppProgress version 0.4.2 [Data set]. HJJB, LLC. Data release v2026-10-28. https://doi.org/10.5281/zenodo.21843040
About
From data release v2026-10-28, which the citation names so these numbers can be found later.
Health
No warnings or errors. 2 of 13 check platforms have notes.
r-devel-linux-x86_64-debian-clangThe unreleased R on Linux, x86_64, debian-clang
Note
- Version checked
- 0.4.2
- Time taken
- 114 s
CRAN incoming feasibility: Note
Maintainer: ‘Karl Forner <karl.forner@gmail.com>’
r-devel-linux-x86_64-debian-gccThe unreleased R on Linux, x86_64, debian-gcc
Note
- Version checked
- 0.4.2
- Time taken
- 79 s
CRAN incoming feasibility: Note
Maintainer: ‘Karl Forner <karl.forner@gmail.com>’
r-devel-linux-x86_64-fedora-clangThe unreleased R on Linux, x86_64, fedora-clang
OK
- Version checked
- 0.4.2
- Time taken
- 83 s
r-devel-linux-x86_64-fedora-gccThe unreleased R on Linux, x86_64, fedora-gcc
OK
- Version checked
- 0.4.2
- Time taken
- 74 s
r-devel-windows-x86_64The unreleased R on Windows, x86_64
OK
- Version checked
- 0.4.2
- Time taken
- 152 s
r-oldrel-macos-arm64The previous release of R on macOS, arm64
OK
- Version checked
- 0.4.2
r-oldrel-macos-x86_64The previous release of R on macOS, x86_64
OK
- Version checked
- 0.4.2
- Time taken
- 127 s
r-oldrel-windows-x86_64The previous release of R on Windows, x86_64
OK
- Version checked
- 0.4.2
- Time taken
- 146 s
r-patched-linux-x86_64The patched release of R on Linux, x86_64
OK
- Version checked
- 0.4.2
- Time taken
- 102 s
r-release-linux-x86_64The current release of R on Linux, x86_64
OK
- Version checked
- 0.4.2
- Time taken
- 102 s
r-release-macos-arm64The current release of R on macOS, arm64
OK
- Version checked
- 0.4.2
- Time taken
- 44 s
r-release-macos-x86_64The current release of R on macOS, x86_64
OK
- Version checked
- 0.4.2
- Time taken
- 148 s
r-release-windows-x86_64The current release of R on Windows, x86_64
OK
- Version checked
- 0.4.2
- Time taken
- 156 s
- 2 Note
- 11 OK
Check output (1)
CRAN incoming feasibility, Note on 2 platforms
Maintainer: ‘Karl Forner <karl.forner@gmail.com>’
No Authors@R field in DESCRIPTION.
Please add one, modifying
Authors@R: person(given = "Karl",
family = "Forner",
role = c("aut", "cre"),
email = "karl.forner@gmail.com")
as necessary.Over time
No change since 22 Apr 2026
As a list (5)
| Changed | Worst status | OK | Notes | Warnings | Errors |
|---|---|---|---|---|---|
| 22 Apr 2026 | Note | 12 | 2 | 0 | 0 |
| 18 Apr 2026 | Error | 11 | 2 | 0 | 1 |
| 10 Apr 2026 | Note | 12 | 2 | 0 | 0 |
| 9 Apr 2026 | Error | 12 | 1 | 0 | 1 |
| 10 Mar 2026 | Note | 12 | 2 | 0 | 0 |
Since March 2026
Downloads
Method, Downloads Method Download figures count requests logged by each distribution channel. They are not counts of installs or of users, because each channel publishes its own totals and this site reads them.Downloads
- Total downloads in the last 30 days
- 115,716+10.6% up on the 30 days before, the better directionIt is the sum of 5 channels: CRAN, r2u, autoCRAN, conda-forge and c2d4u.
CRAN rank
388 of 26,530
CRAN
76,626 downloads in the last 30 days
- Rank
- 388 of 26,530
- Change
- +1.6% up on the 30 days before, the better direction
It is in the total. Take it out
r2u
10,115 downloads in the last 30 days
- Rank
- 311 of 30,526
- Change
- +186% up on the 30 days before, the better direction
It is in the total. Take it out
autoCRAN
101 downloads in the last 30 days
- Rank
- 601 of 29,212
- Change
- +8.6% up on the 30 days before, the better direction
It is in the total. Take it out
conda-forge
28,668 downloads in the last 30 days
- Rank
- 262 of 3,828
- Change
- +14.2% up on the 30 days before, the better direction
It is in the total. Take it out
c2d4u, no longer updated
206 downloads in the last 30 days
- Rank
- 230 of 7,575
- Change
- −55.1% down on the 30 days before, the worse direction
It is in the total. Take it out
The total is 115,716 downloads in the last 30 days. It is the sum of 5 channels: CRAN, r2u, autoCRAN, conda-forge and c2d4u.
Over time
Dependencies
- Needs
- 0
- Dependent packages
- 110
- Suggested by
- 0
Optional extras (4)
Dependent packages (50 of 110)
| Package | Title | Downloads in 30 days |
|---|---|---|
| uwot | The Uniform Manifold Approximation and Projection (UMAP) Method for Dimensionality Reduction | 65,293 |
| Seurat | Tools for Single Cell Genomics | 64,839 |
| MatchIt | Nonparametric Preprocessing for Parametric Causal Inference | 22,567 |
| geometry | Mesh Generation and Surface Tessellation | 18,975 |
| harmony | Fast, Sensitive, and Accurate Integration of Single Cell Data | 16,819 |
| sommer | Solving Mixed Model Equations in R | 5,835 |
| MCMCprecision | Precision of Discrete Parameters in Transdimensional MCMC | 4,101 |
| sccore | Core Utilities for Single-Cell RNA-Seq | 3,727 |
| GPBayes | Tools for Gaussian Process Modeling in Uncertainty Quantification | 2,227 |
| word2vec | Distributed Representations of Words | 1,524 |
| RcppPlanc | Parallel Low-Rank Approximation with Nonnegativity Constraints | 1,353 |
| textmineR | Functions for Text Mining and Topic Modeling | 1,048 |
| BGGM | Bayesian Gaussian Graphical Models | 1,020 |
| BGVAR | Bayesian Global Vector Autoregressions | 984 |
| pagoda2 | Single Cell Analysis and Differential Expression | 960 |
| rliger | Linked Inference of Genomic Experimental Relationships | 909 |
| bsvars | Bayesian Estimation of Structural Vector Autoregressive Models | 886 |
| rMVP | Memory-Efficient, Visualize-Enhanced, Parallel-Accelerated GWAS Tool | 877 |
| cppRouting | Algorithms for Routing and Solving the Traffic Assignment Problem | 764 |
| conos | Clustering on Network of Samples | 748 |
| spatialrisk | Spatial Concentration and Radius-Based Risk Calculations | 743 |
| genepop | Population Genetic Data Analysis Using Genepop | 691 |
| matchingMarkets | Analysis of Stable Matchings | 597 |
| smerc | Statistical Methods for Regional Counts | 593 |
| bsvarSIGNs | Bayesian SVARs with Sign, Zero, and Narrative Restrictions | 577 |
| jrSiCKLSNMF | Multimodal Single-Cell Omics Dimensionality Reduction | 571 |
| spNetwork | Spatial Analysis on Network | 567 |
| profoc | Probabilistic Forecast Combination Using CRPS Learning | 560 |
| recosystem | Recommender System using Matrix Factorization | 552 |
| moire | Multiplicity of Infection and Allele Frequency Recovery from Noisy Polyallelic Genetics Data | 543 |
| MSCquartets | Analyzing Gene Tree Quartets under the Multi-Species Coalescent | 541 |
| jackalope | A Swift, Versatile Phylogenomic and High-Throughput Sequencing Simulator | 510 |
| corpustools | Managing, Querying and Analyzing Tokenized Text | 509 |
| remstats | Computes Statistics for Relational Event History Data | 500 |
| purgeR | Inbreeding-Purging Estimation in Pedigreed Populations | 498 |
| shrinkTVP | Efficient Bayesian Inference for Time-Varying Parameter Models with Shrinkage | 494 |
| textreuse | Detect Text Reuse and Document Similarity | 493 |
| oppr | Optimal Project Prioritization | 476 |
| rTLS | Tools to Process Point Clouds Derived from Terrestrial Laser Scanning | 472 |
| CDatanet | Econometrics of Network Data | 460 |
| bayesianVARs | MCMC Estimation of Bayesian Vectorautoregressions | 459 |
| poolfstat | Computing f-Statistics and Building Admixture Graphs Based on Allele Count or Pool-Seq Read Count Data | 458 |
| hibayes | Individual-Level, Summary-Level and Single-Step Bayesian Regression Model | 457 |
| tidylda | Latent Dirichlet Allocation Using 'tidyverse' Conventions | 445 |
| FLORAL | Fit Log-Ratio Lasso Regression for Compositional Data | 444 |
| WpProj | Linear p-Wasserstein Projections | 444 |
| Racmacs | Antigenic Cartography Macros | 440 |
| sentopics | Tools for Joint Sentiment and Topic Analysis of Textual Data | 435 |
| disclapmix | Discrete Laplace Mixture Inference using the EM Algorithm | 426 |
| DNAtools | Tools for Analysing Forensic Genetic DNA Data | 424 |
Code
Method, Code Method Code metrics come from reading the released source of each package version. The package is never installed, loaded or run.Code metrics
README, vignettes, a NEWS file and the shares read from its help pages. Files kept only in the repository, such as a pkgdown configuration or CI files, are read by the repository scan instead.
- Functions
- 0
- Public exports
- 0
- Lines of R code
- 0
Size and composition
Lines by kind (296)
| Kind | Lines | Share |
|---|---|---|
| Tests | 88 | 30% |
| Documentation | 208 | 70% |
Lines by language
| Language | Lines | Share |
|---|---|---|
| Rd | 208 | 70% |
| R | 88 | 30% |
Languages are counted from file extensions.
- Files
- 36
- R functions
- 0
Complexity
About complexity
Cyclomatic complexity counts the independent paths through a function: 1 is a straight line, higher is harder to test. R functions only.
Call graph figures
- R functions
- 0
- Calls
- 0
- Unconnected
- 0
- Groups
- 0
Growth (7 releases)
Release changes
Tests
The coverage tool stopped with an error.
- Test cases
- 6
- Lines of tests
- 88
Test suite
- Has tests
- Yes
- Test frameworks
- RUnit, testthat
- Test cases
- 6
Documentation
- Help pages with examples
- 100%
- Examples run in checks
- 0%
Other documentation
- README
- Yes, 201 words
- Release notes file
- No
- Help pages
- 1
- Lines of documentation
- 208
People
Method, People Method People on the site are the names packages give them in their Author and maintainer identity
DESCRIPTION files: authors from the author list, and the maintainer from the Maintainer field. Spellings of one name become one person only where the rules below allow it, and when in doubt the rules keep people apart.
Maintainer since 0.1 (2013)
Repository
Method, figures by host Method Repository signals are the figures read from the source repository a package links to: stars, forks, issues, commits, releases and the time issues take to close. They are read from GitHub, GitLab, Codeberg and Bitbucket.Repository signals
URL and BugReports fields of its DESCRIPTION file. Read-only mirrors, the cran and bioc accounts on GitHub and git.bioconductor.org, are left out.
kforner / rcpp_progress on github.com
- Stars
- 32no change on 30 days ago
- Forks
- 6
- Open issues
- 2
- Last commit
- 4 Jun 2024
Activity
- Commits
- 151
- Open pull requests
- 1
- Tagged releases
- 2
- Latest tagged release
- 1.0.0, 3 Jun 2024
- In development
- Default branch at 1.0.0, ahead of CRAN 0.4.2 (checked 2026-10-25)
- Issues closed in
- 44 days (median)
- Pull requests closed in
- 0 days (median)
- Pull requests merged
- 89%
- Created
- 28 Jul 2014
- Licence file reads as
- –
Development practices (8)
| Kind | Found |
|---|---|
| Continuous integration | GitHub Actions, R CMD check workflow The R CMD check workflow runs on Linux, macOS and Windows, and on R-devel |
| Docs source | pkgdown GitHub Pages site last deployed 2024-06-04 The repository has a site deploy workflow |
| Coverage | Coverage reporting (Codecov) |
| Reproducibility and dev environment | Makefile, Dev Container |
Method, repository practices Method Beta Each week a scan of the public source repository a package links to looks for the tools a maintainer has set up, and the Repository section lists the findings. Repositories on GitHub and GitLab are scanned.Repository practices
R CMD build reads .Rbuildignore and leaves out files used only in development, such as .github/, .lintr, renv/, a Dockerfile and cran-comments.md, so the released source file holds almost none of them. The repository is the one place these files stay visible.
History
Method, History Method Archived is built from CRAN's archive records, its list of check deadlines and Bioconductor's package records. Every figure is counted to 28 Oct 2026, the day the data was read.Packages leaving