A Set of RStudio Addins
- CRAN checks, method
Method
Checks and health
CRAN runs every current package through
R CMD checkon a set of machines and publishes a result for each one. The health shown on a package page comes from these results alone.- Problems
- Notes alone never count against a package, but a warning, an error or a failure on any platform is a problem. Open CRAN deadlines are a fact of their own, shown as a clock after the mark, so the mark always says what the checks found.
- Checks only
- Health reflects CRAN's check results and nothing else. Even a package with no tests, no coverage or no recent release can have every platform OK.
- Once a day
- Results are collected once a day from files CRAN publishes. Each platform is one machine set-up, named by its R version, operating system, architecture and compiler, such as r-devel-linux-x86_64-fedora-clang.
- Platforms counted
- The 13 in 3 of 13 is the number of platform rows CRAN published for that package on the day of collection. The set of machines changes over time, so the number is not fixed, and a package missing from a platform counts as neither passing nor failing there.
- OKnotes on 2 of 13
- CRAN 30-day downloads, method
- 217−21.4% down on the 30 days before, the worse direction
- Dependent packages, method
Method
Reverse dependencies
Dependent packages are other packages that list this one under
Depends,ImportsorLinkingToin theirDESCRIPTIONfile. Those fields list the packages a package needs to install, so dependents break if this one is archived or broken.- As declared
- The counts follow the declarations as written, not whether a package uses the other one when it runs.
- Suggests apart
- Packages that list this one only under
Suggestsinstall and run without it, and use it for tests, examples or an optional feature. They are counted as Suggested by, never among the dependents, and a package that also lists it under one of the three fields is a dependent and is not counted again. - Zero
- Zero dependents means no current CRAN package declares a need for this one, though some may suggest it. On 28 Oct 2026, 19,572 of the 25,583 current CRAN packages had no dependent package.
- 0none suggest it
- Test coverage, method
Method
Test coverage
Test coverage is measured by downloading each CRAN package's current source file, installing its dependencies, building it and running its tests under covr.
- Almost half of CRAN has no tests to run
- Only CRAN packages are measured. Many have no percentage, most often because the package has no tests, and that blank is a recorded outcome, not missing data.
- NOT_CRAN
- Tests run with NOT_CRAN=true, so tests that skip themselves on CRAN run here, and the figure can differ from what CRAN's own checks see.
- Current version only
- Only the current version is measured, and a new version on CRAN is measured again. Older rows are kept but never filled in later. This is one package's run.
- Never 0%
- On a package page three states stay apart: measured, no tests, and not measured. Neither of the last two is ever shown as 0%.
- No testsnothing to run
- Advisories, method
Method
Security advisories
Advisories come from the R Consortium advisory database, a community record of security problems in R packages, as OSV publishes it.
- The copy
- The record is read once a day. The data is published under the Apache License 2.0 and is credited on the advisories list.
- Box under the name
- Under the package's name, a box names any advisory that affects the current release, with its fix or that there is none.
- Ranges
- Advisories state ranges, such as from 0.9.12 up to but not including 1.8.8. Each range is checked against every version CRAN has published, using the version rules R itself uses, so a release that came out after the advisory was written is still caught by its range.
- Not the package
- The rating is for the library flaw itself, not for how exposed the R package is, and it is never added up into a figure for the package.
- None known
About
Method, About Method Licence figures come from the Licences
License field of each package's DESCRIPTION file, read the way R itself reads it. No licence file is opened.tools::analyze_license() and R's own licence database, as CRAN's checks read it.| is read, so one string can offer two families.
A set of RStudio addins that are designed to be used in combination with user-defined RStudio keyboard shortcuts. These addins either: 1) insert text at a cursor position (e.g.
Full description
A set of RStudio addins that are designed to be used in combination with user-defined RStudio keyboard shortcuts. These addins either: 1) insert text at a cursor position (e.g. insert operators %>%, <<-, %$%, etc.), 2) replace symbols in selected pieces of text (e.g., convert backslashes to forward slashes which results in stings like "c:\data\" converted into "c:/data/") or 3) enclose text with special symbols (e.g., converts "bold" into "**bold**") which is convenient for editing R Markdown files.
- Maintainer
- Vilmantas Gegzna
- Licence
- MIT + file LICENSE
- Latest release
- 14 Dec 2017
- First release
- 6 Jun 2016
More details
- Releases
- 4
- Needs compilation
- No
- Needs R
- >= 3.2
- Date
- 2017-12-14
- LazyData
- TRUE
- RoxygenNote
- 6.0.1
Subjects (1) Method, SubjectsMethod
Subjects and collections
Subjects are the site's own grouping of CRAN packages, found by clustering. Collections are sets of packages that communities declare, such as the tidyverse.
- Subjects
- Subjects are found by clustering the words of current CRAN packages and the packages they use. No one edits them by hand.
- Collections
- Collections are sets that communities declare, through a package that installs the set or an organization on GitHub. The site finds them by rules.
- Who made each
- Subjects are marked Site and collections Community. Subjects, collections and task views are never mixed in one list.
- The day of the data
- Subjects and collections were last worked out on 22 Oct 2026.
Cite
Package
Run in R for the authors' preferred citation:
citation("spAddins")Gegzna, V. (2017). spAddins: A Set of RStudio Addins (Version 0.2.0) [Computer software]. https://doi.org/10.32614/CRAN.package.spAddins
About
This package has no citation file, so citation() returns this entry built from DESCRIPTION.
R Observatory
For a number measured here: a download total, a coverage figure, an archival date.
Balamuta, J. J. (2026). R Observatory: Metrics for spAddins version 0.2.0 [Data set]. HJJB, LLC. Data release v2026-10-28. https://doi.org/10.5281/zenodo.21843040
About
From data release v2026-10-28, which the citation names so these numbers can be found later.
Health
No warnings or errors. 2 of 13 check platforms have notes.
r-devel-linux-x86_64-debian-clangThe unreleased R on Linux, x86_64, debian-clang
Note
- Version checked
- 0.2.0
- Time taken
- 33 s
CRAN incoming feasibility: Note
Maintainer: ‘Vilmantas Gegzna <GegznaV@gmail.com>’
r-devel-linux-x86_64-debian-gccThe unreleased R on Linux, x86_64, debian-gcc
Note
- Version checked
- 0.2.0
- Time taken
- 27 s
CRAN incoming feasibility: Note
Maintainer: ‘Vilmantas Gegzna <GegznaV@gmail.com>’
r-devel-linux-x86_64-fedora-clangThe unreleased R on Linux, x86_64, fedora-clang
OK
- Version checked
- 0.2.0
- Time taken
- 27 s
r-devel-linux-x86_64-fedora-gccThe unreleased R on Linux, x86_64, fedora-gcc
OK
- Version checked
- 0.2.0
- Time taken
- 27 s
r-devel-windows-x86_64The unreleased R on Windows, x86_64
OK
- Version checked
- 0.2.0
- Time taken
- 57 s
r-oldrel-macos-arm64The previous release of R on macOS, arm64
OK
- Version checked
- 0.2.0
r-oldrel-macos-x86_64The previous release of R on macOS, x86_64
OK
- Version checked
- 0.2.0
- Time taken
- 48 s
r-oldrel-windows-x86_64The previous release of R on Windows, x86_64
OK
- Version checked
- 0.2.0
- Time taken
- 55 s
r-patched-linux-x86_64The patched release of R on Linux, x86_64
OK
- Version checked
- 0.2.0
- Time taken
- 28 s
r-release-linux-x86_64The current release of R on Linux, x86_64
OK
- Version checked
- 0.2.0
- Time taken
- 27 s
r-release-macos-arm64The current release of R on macOS, arm64
OK
- Version checked
- 0.2.0
- Time taken
- 15 s
r-release-macos-x86_64The current release of R on macOS, x86_64
OK
- Version checked
- 0.2.0
- Time taken
- 47 s
r-release-windows-x86_64The current release of R on Windows, x86_64
OK
- Version checked
- 0.2.0
- Time taken
- 54 s
- 2 Note
- 11 OK
Check output (1)
CRAN incoming feasibility, Note on 2 platforms
Maintainer: ‘Vilmantas Gegzna <GegznaV@gmail.com>’
Found the following (possibly) invalid file URI:
URI: /commits/master
From: README.mdDownloads
Method, Downloads Method Download figures count requests logged by each distribution channel. They are not counts of installs or of users, because each channel publishes its own totals and this site reads them.Downloads
- Total downloads over all time
- 32,693It is the sum of 3 channels: CRAN, r2u and autoCRAN.
The total is 32,693 downloads over all time. It is the sum of 3 channels: CRAN, r2u and autoCRAN.
Over time
Dependencies
Code
Method, Code Method Code metrics come from reading the released source of each package version. The package is never installed, loaded or run.Code metrics
README, vignettes, a NEWS file and the shares read from its help pages. Files kept only in the repository, such as a pkgdown configuration or CI files, are read by the repository scan instead.
rmd_list
- Kind
- Public R function
- File
- R/rmd_lists.R, line 19
- Lines
- 44
- Complexity
- 2
Method
Call graph and functions
The function table and the call graph come from reading the package source, and no code is built or run. Each function is one definition, and a call means one function's body names another in the same package.
- Five drawings
- The Code section draws the calls five ways, two about one function and three about the whole package. The Markdown twin gives all five in words.
- Counted
- R functions are top-level assignments of a function in a file at the root of
R/, and right assignment does not count. Compiled functions are definitions undersrc/read by the C, C++, Fortran or Rust grammar. - Plain names
- Calls are recorded when the function called is a plain name, or the right side of :: or :::, matching a function the same package defines. Calls to base R and to other packages are left out.
- Latest CRAN version
- CRAN detail is kept for the latest version only and is written again at each analysis. Older releases keep the whole-network figures but no drawing.
Called by 7
Calls 1
- Functions
- 60
- Public exports
- 59
- Lines of R code
- 727
- Median complexity
- 1
Functions (60)
| Function | Kind | File | Lines | Complexity |
|---|---|---|---|---|
repeat_symbol | Public | R/repeat_symbol.R | 5 | 1 |
rmd_a_bold | Public | R/rmd_formatting.R | 4 | 1 |
rmd_a_bold2 | Public | R/rmd_formatting.R | 4 | 1 |
rmd_a_bold_italics | Public | R/rmd_formatting.R | 3 | 1 |
rmd_a_italics | Public | R/rmd_formatting.R | 4 | 1 |
rmd_a_italics2 | Public | R/rmd_formatting.R | 4 | 1 |
rmd_a_strikethrough | Public | R/rmd_formatting.R | 3 | 1 |
rmd_a_subscript | Public | R/rmd_formatting.R | 3 | 1 |
rmd_a_superscript | Public | R/rmd_formatting.R | 3 | 1 |
rmd_b_heading_1 | Public | R/rmd_headings.R | 4 | 1 |
rmd_b_heading_1_title | Public | R/rmd_headings.R | 5 | 1 |
rmd_b_heading_2 | Public | R/rmd_headings.R | 4 | 1 |
Size and composition
Lines by kind (1,573)
| Kind | Lines | Share |
|---|---|---|
| R code | 727 | 46% |
| Documentation | 583 | 37% |
| Guides | 263 | 17% |
Lines by language
| Language | Lines | Share |
|---|---|---|
| R | 727 | 46% |
| Rd | 583 | 37% |
| Vignettes | 263 | 17% |
Languages are counted from file extensions.
- Files
- 51
- R functions
- 60
Complexity
- Median
- 1
- Mean
- 1.02
- Highest
- 2
- Median lines per function
- 3
About complexity
Cyclomatic complexity counts the independent paths through a function: 1 is a straight line, higher is harder to test. R functions only.
Call graph figures
- R functions
- 60
- Calls
- 51
- Unconnected
- 12
- Groups
- 5
Growth (4 releases)
Release changes
0.1.7 to 0.2.0, 3 Jan 2017 to 14 Dec 2017
- Files changed
- 83
- Lines added
- 1,977
- Lines deleted
- 2,238
- Exports
- 59 added, 29 removed
Exports added (59)
repeat_symbolrmd_a_boldrmd_a_bold2rmd_a_bold_italicsrmd_a_italicsrmd_a_italics2rmd_a_strikethroughrmd_a_subscriptrmd_a_superscriptrmd_b_heading_1rmd_b_heading_1_titlermd_b_heading_2rmd_b_heading_2_subtitlermd_b_heading_3rmd_b_heading_4rmd_b_heading_5rmd_b_heading_6rmd_code_blockrmd_code_block_rrmd_code_inlinermd_code_inline_rrmd_equation_blockrmd_equation_block2rmd_equation_inlinermd_listrmd_list_letteredrmd_list_lettered_2rmd_list_numberedrmd_list_numbered_2rmd_list_unorderedrmd_list_unordered_2rmd_master_listrs_enclose_all_with_linesrs_enclose_first_row_with_linesrs_enclose_selection_withrs_get_ind_first_selected_colrs_get_ind_first_selected_rowrs_insert_arrow_lrrs_insert_arrow_lr2rs_insert_arrow_rlrs_insert_arrow_rl2rs_insert_at_row_startrs_insert_exposition_pipers_insert_infix_Rrs_insert_infix_inrs_insert_infix_not_inrs_insert_line_dsrs_insert_line_ssrs_insert_line_swrs_insert_matrix_multiplicationrs_insert_pipers_insert_symbol_seqrs_insert_tee_pipers_insert_update_pipers_replace_in_selectionrs_replace_slash_b2fwrs_replace_slash_bd2srs_replace_slash_bs2drs_replace_slash_fw2b
Exports removed (29)
Back2ForwardSlashBack2doubleBackSlashenclose_with_asteriskenclose_with_asterisk2enclose_with_backtickenclose_with_dollarenclose_with_dollar2enclose_with_tildeenclose_with_tilde2enclose_with_underscoreenclose_with_underscore2insertArrowLR2_AddininsertArrowRL2_AddininsertArrowRL_AddininsertCompAssignPipe_AddininsertExPipe_AddininsertIfNULL_AddininsertIn_AddininsertMatMuliplication_AddininsertNotIn_AddininsertPaste0_AddininsertPaste_AddininsertPipeline_AddininsertTeeOperator_Addininsert_ds_line_Addininsert_if_null_Addininsert_if_null_or_len0_Addininsert_ss_line_Addininsert_sw_line_Addin
Changed measures (19)
| Measure | Subject | Before | After |
|---|---|---|---|
| Public exports | Structure | 29 | 59 |
| Internal functions | Structure | 2 | 1 |
| Total lines | Structure | 1,915 | 1,573 |
| Lines of R code | Structure | 711 | 727 |
| R functions | Languages | 32 | 60 |
| Lines of documentation | Documentation | 988 | 583 |
| Help pages with examples (share) | Documentation | 86% | 9% |
| Help pages with examples | Documentation | 24 | 2 |
| Arguments documented | Documentation | 100% | |
| Return value documented | Documentation | 0% | 5% |
| Mean complexity | Complexity | 1.06 | 1.02 |
| Lines per function (mean) | Complexity | 3.97 | 5.05 |
| Functions (nodes) | Call graph | 32 | 60 |
| Call edges | Call graph | 12 | 51 |
| Most connections on one function | Call graph | 10 | 13 |
| Mean connections | Call graph | 0.75 | 1.7 |
| Functions with no connections | Call graph | 18 | 12 |
| Separate groups | Call graph | 2 | 5 |
| Direct dependencies | Dependencies | 1 | 4 |
Most changed files (12 of 83)
| File | Lines added | Lines deleted |
|---|---|---|
inst/rstudio/addins.dcf | 184 | 99 |
inst/doc/v1_workflow.html | 149 | 99 |
R/enclose_addins.R | 0 | 230 |
vignettes/v1_workflow.Rmd | 117 | 70 |
inst/doc/v1_workflow.Rmd | 117 | 65 |
README.md | 25 | 148 |
R/insert_addins.R | 0 | 157 |
R/rmd_lists.R | 105 | 0 |
MD5 | 49 | 44 |
R/insert_Line_addins.R | 0 | 92 |
NAMESPACE | 60 | 29 |
R/rmd_formatting.R | 84 | 0 |
Tests
The package was built and has no tests to run.
- Lines of tests
- 0
- Exports named in tests
- 0%
Test suite
- Has tests
- No
- Test frameworks
- No tests in this release
- Test lines per line of code
- 0
Documentation
- Exports documented
- 100%
- Arguments documented
- 100%
- Return value documented
- 4.8%
- Help pages with examples
- 9.1%
- Examples run in checks
- 50%
Guides (1)
Other documentation
- README
- Yes, 180 words
- Release notes file
- No
- Help pages
- 22
- Lines of documentation
- 583
People
Method, People Method People on the site are the names packages give them in their Author and maintainer identity
DESCRIPTION files: authors from the author list, and the maintainer from the Maintainer field. Spellings of one name become one person only where the rules below allow it, and when in doubt the rules keep people apart.
Maintainer since 0.1.3 (2016), author, copyright holder
Repository
Method, figures by host Method Repository signals are the figures read from the source repository a package links to: stars, forks, issues, commits, releases and the time issues take to close. They are read from GitHub, GitLab, Codeberg and Bitbucket.Repository signals
URL and BugReports fields of its DESCRIPTION file. Read-only mirrors, the cran and bioc accounts on GitHub and git.bioconductor.org, are left out.
GegznaV / spaddins on github.com
- Stars
- 8
- Forks
- 3
- Open issues
- –
- Last commit
- 20 Nov 2020
Activity
- Commits
- 101
- Open pull requests
- 0
- Tagged releases
- 0
- Latest tagged release
- –
- In development
- Default branch at 0.2.3, ahead of CRAN 0.2.0 (checked 2026-10-25)
- Issues closed in
- –
- Pull requests closed in
- 0 days (median)
- Pull requests merged
- 88%
- Created
- 6 Jun 2016
- Licence file reads as
- –
Development practices (6)
| Kind | Found |
|---|---|
| Continuous integration | Travis CI (config file) |
| Docs source | README.Rmd, pkgdown GitHub Pages site last deployed 2020-11-20 |
| Reproducibility and dev environment | data-raw/ |
| Lint, format, editor | RStudio project |
Method, repository practices Method Beta Each week a scan of the public source repository a package links to looks for the tools a maintainer has set up, and the Repository section lists the findings. Repositories on GitHub and GitLab are scanned.Repository practices
R CMD build reads .Rbuildignore and leaves out files used only in development, such as .github/, .lintr, renv/, a Dockerfile and cran-comments.md, so the released source file holds almost none of them. The repository is the one place these files stay visible.
History
Method, History Method Archived is built from CRAN's archive records, its list of check deadlines and Bioconductor's package records. Every figure is counted to 28 Oct 2026, the day the data was read.Packages leaving